High Pressure Solutions

Hydro-Demolition

The Conjet Robot is able to remove concrete and prepare surfaces on horizontal, vertical, and overhead surfaces on both reinforced and nonreinforced structures while maintaining the current


What is Hydro-Demolition?

High Pressure Solutions

Hydrodemolition removes a layer of concrete by shooting a jet of high pressure water into the material. When the water fills the natural cavities in the concrete, it bursts from within, exploding upwards. The result is a rough surface, free from micro-cracks, ready for a new layer of fresh concrete. It also leaves the reinforcement bars completely intact. Hydrodemolition can also be used for paint removal and surface preparation. A radio controlled robot (supplied with high pressure water from a pump) performs the demolition, keeping the supervising operator at a safe distance.

The robot is equipped with a lance that moves over the concrete surface, shooting a high pressure water jet and removing the damaged material. The operator sets the hydrodemolition parameters (cutting width, speed and jet angle, for example), positions the robot and starts the hydrodemolition process. When this is done, the robot works autonomously according to the set parameters, working its way in a straight line. All the operator has to do is monitor the progress and inspect the result.

CCS

The Conjet Robot is able to remove concrete and prepare surfaces on horizontal, vertical, and overhead surfaces on both reinforced and nonreinforced structures while maintaining the current integrity of the surface.

Why Hydro-Demolition?

High Pressure Solutions

  • Removes all deteriorated concrete
  • Programmable for uniform depth of sound concrete removal
  • Removes concrete without chipping, cutting, or damaging reinforcing steel
  • Does NOT produce vibrations that cause micro-fractures like jackhammers do.
  • Reduces costs by elminating the need to remove and re-pour entire slabs of concrete
  • Creates a great bonding surface for repair materials
  • Faster than chipping, shortening constructions schedules
  • Employees are not exposed to hazardous dust
  • Runs on Electricity, not fuel
  • Light Weight – ideal for use on platforms and scaffolding
  • Suitable for a white range of applications
  • Passes easily through 3ft wide spaces
  • Supplied by 605 horsepower high pressure hydroblast pump
  • Able to work in confined spaces inaccessable to larger machines
Hydro-Demolition Solutions for:

High Pressure Solutions

  • Bridge Decks
  • Bridge Substructures
  • Tunnel Walls
  • Ship Cleaning
HYDRO-DEMOLITION ACHIEVES TWICE THE BOND STRENGTH ON A CONCRETE STRUCTURE COMPARED TO JACKHAMMERS OR OTHER PERCUSSION METHODS

Call (360) 703-6233 TODAY!

Call CCS and learn about CCS Conjet technology, removal of concrete with high pressure water – CCS has the best Conjet hydro-demolition machine in the world. Same Conjet supplied equipment is used for the maintenance of Panama Canal, Golden Gate, Dubai Dry Dock, Gori Dam, Channel Tunnel and many more structures worldwide.
All About Solutions

CCS Services

No industrial cleaning job is too large or too small for CCS.

CCS

CCS-Industrial Services provides industrial cleaning and spill response to almost every pulp and paper mill in the Pacific Northwest. We also service major oil companies and a wide range of manufacturing and industrial clients. CCS has demonstrated its ability to complete large and complex industrial cleaning challenges on schedule, within budget, and in compliance with the most stringent industrial health & safety programs. No industrial cleaning job is too large or too small for CCS.

All About Safety



PNE Co. has an impeccable safety record with four-year Experience Modification Rating (EMR), OSHA Total Recordable Incident Rate (TRIR), and Lost Time Rates well below environmental remediation, electrical, and construction industry averages.

The PNE Co. commitment to employee health and safety is reflected in its programs for new hire screening and orientation, regulatory testing and training, and job and hazard specific education. These efforts are supported by the PNE Co. Safety Incentive Program that encourages and rewards safe work habits. PNE employs three full-time Health & Safety Department professionals experienced in high-voltage electrical systems, general construction, waste management and disposal, industrial cleaning, emergency response, and environmental remediation. GRS subcontractors are selected based upon their EMR, TRIR, and the strength of their health and safety programs.

 
Founded in 1989
Our renewed vision is to become a national provider of customer solutions in our markets.


CCS – All About Solutions. We will provide the best possible solutions to our customers which exceed their expectations and gain their trust through exceptional performance by every member of our team. We will perform our work with safety, integrity and pride.

Your Solution Starts with Contact

Send us an E-Mail



CCS Corporate Headquarters

CONTACT INFO



Contact Info

All About Solutions

Join Our Team

CCS is a unique company to work for in that it offers its employees such a diverse group of job opportunities under one roof.

THANKS FOR YOUR INTEREST IN CCS!

We're glad you stopped by!

CCS is a unique company to work for in that it offers its employees such a diverse group of job opportunities under one roof. Where else will you find industrial work, Emergency Response, Marine Spill response, Hazardous Materials Handling, Hydro Demolition and Hydroblasting-Truck driving and operations for Tankers and Vacuum trucks–ALL at the same place AND a great benefits package, including, Medical, Dental, & 401k. The opportunities are endless at CCS, and YOU are the only one that can limit your potential.

If you are looking for a new Career with multiple ways to advance–then YOU have come to the right place. But, we do have a few requirements: Previous experience is a plus, but not required. NO DRUG USE or alcohol abuse is tolerated so keep it clean.

You need to be neat in appearance and have some manners. Our staff and our customers deserve the same respect that you would want for yourself.

A solid work history. We are looking for people to help build our company and take care of our customers

If you are looking for something for “now” then do us a favor and keep looking.

Have a drivers license and be safe. Be willing to work hard and be a part of something exceptional… The CCS Team!

Search CCS Jobs
video-control-offvideo-control-on

(888) 423-6316


24 Hour Emergency Response